Flash Modes; Power Save Feature - Olympus Stylus 600 Mode D'emploi

Masquer les pouces Voir aussi pour Stylus 600:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Flash Modes

1
Select the flash mode by repeatedly pressing Y#.
If not used for approximately 2 seconds, the camera applies the current settings, and the
setting screen disappears.
2
Press the shutter button halfway.
When the flash is set to fire, the # mark lights.
3
Press the shutter button completely to take the picture.
Flash working range:
W (max.): Approx. 4.0 m (13.1 ft.)
T (max.): Approx. 2.5 m (8.2 ft.)
Icon
Flash Mode
No
Auto flash
indication
Red-eye
!
reduction flash
#
Fill-in flash
$
Flash off

Power Save Feature

To save battery power, the camera automatically enters sleep mode and stops
operating if not used for 3 minutes. Operate the shutter button or zoom button
to reactivate the camera.
If the camera is not operated for 15 minutes after the camera enters sleep mode,
it automatically retracts the lens and turns off. To resume operation, turn on the
power again.
The flash fires automatically in low light or backlight
conditions.
The red-eye reduction flash mode significantly reduces this
phenomenon by emitting pre-flashes before firing the
regular flash.
The flash fires regardless of the available light.
The flash does not fire even in low light conditions.
Description
En
13

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Digital 600

Table des Matières