About The Pressure Rating Indicator; About Memory - A&D Medical Life Source UA-1030T Manuel D'instructions

age 1 Hypertension
ehypertension

ABOUT THE PRESSURE RATING INDICATOR™

ormal
The Pressure Rating Indicator™ is a feature which
JNC7 Classification Indicator
provides a snapshot of your blood pressure classifi-
Hypertension Stage 2
cation based on your measurements. This will let you
Hypertension Stage 2
quickly know what your blood pressure readings
Hypertension Stage 1
mean. Each segment of the bar indicator corresponds Prehypertension
Prehypertension
to the Seventh Report of the Joint National Committee
Normal
(JNC7) on Prevention, Evaluation and Treatment of
High Blood Pressure from the National Heart, Lung
and Blood Institute - May 2003. For a more detailed
look at this blood pressure classification, please refer
Example
to "Assessing High Blood Pressure" on page E-22.
Hypertension
Stage 2
: The indicator displays a segment, based on the current measurement,
corresponding to the JNC7 Classification.
NOTE: Due to other risk factors (e.g. diabetes, obesity, smoking, etc.) in addition to your blood
on
pressure measurement, the Pressure Rating Indicator is approximate. Please consult with your
physician for interpretation and diagnosis of your blood pressure measurements.
NOTE: Residents outside of the United States (e.g.. Canada and Mexico) should refer to the WHO
Classification Table on page E-22 for assessment of their blood pressure
measurement.
E-17
JNC7 Classification Indicator
Hypertension Stage 2
Hypertension Stage 2
JNC7 Classification Indicator
Hypertension Stage 1
Prehypertension
Stage 2 Hypertension
Prehypertension
Stage 1 Hypertension
Normal
Prehypertension
Normal
Example
Example
Hypertension
Stage 2
Stage 2
Hypertension
A&D Medical (Toll-Free): 1-888-726-9966
JNC7 Classification Indicator
Note: This device stores the last 90 measurements in memory. The device announces the memory
Stage 2 Hypertension
data values as they are displayed.
Stage 1 Hypertension
Prehypertension
1. Press the or button. The average of all
Normal
measurements and the number of data are
displayed. (If no data, "0" is displayed.
Press the , or button to turn the
START
device off.)
Example
2. Each time the button (or the
to display the data in the reverse order) is
Stage 2
Hypertension
pressed, the memory data is displayed as
follows.
Average of all AM (morning) measurements
taken between 4:00 and 9:59. (In the
example, 10 measurements. If no data, "--" is
displayed.)
Average of all PM (evening) measurements
taken between 18:00 and 1:59. (In the
example, 9 measurements. If no data, "--" is
displayed.)
Most recent data (See No. 35). Three
seconds after the data number display, the
measurement data is displayed.
Last data (No.1). Three seconds after the
data number display, the measurement data
is displayed.
3. After the last data is displayed, press the
button to return the average display of all measurements.
4. Press the button to turn the device off. After one minute of
START
non-operation, the device will turn off automatically.
In Canada - Auto Control Medical (Toll-Free): 1-800-461-0991

ABOUT MEMORY

Press or
Average systolic
Average diastolic
Average pulse
Average of
all the data
button
Average systolic
Average diastolic
Average pulse
Average
of AM data
Average systolic
Average diastolic
Average pulse
Average
of PM data
Most recent data
Last data (Oldest)
Systolic
Diastolic
Pulse
Systolic
Diastolic
Pulse
E-18