Selecting The Correct Cuff Size; Adjusting The Clock; Adjusting The Pressure - A&D Medical Life Source UA-1030T Manuel D'instructions

SELECTING THE CORRECT CUFF SIZE

Using the correct cuff size is important for an accurate reading. A cuff that
is too large will produce a reading that is lower than the correct blood
pressure; a cuff that is too small will produce a reading that is higher than
the correct blood pressure. With your arm hanging at the side of your body,
measure the circumference of your upper arm at the midpoint between the
shoulder and elbow.
SlimFit ™ Small Cuff
6.3
1 2
SlimFit ™ Medium Cuff
SlimFit ™ Large Cuff
1 - 2cm
SmoothFit ™ Cuff
(0.5'')
Using the right sized cuff is essential to an accurate measurement. Our
unique cuff is designed to accommodate a wide range of arm sizes, from
9 – 14.6" (23 – 37 cm). The SlimFit™ cuff is contoured to provide you with
a quick and comfortable fit. Just slide the cuff onto your upper arm and
secure – it's that simple! For more detail, please read the section Taking
22 - 32cm
Your Blood Pressure (see pg. E-12).
8.6" - 12.6"
If your arm circumference is greater than 14.6" (37 cm) or smaller than 9"
(23 cm), you will need to purchase a different size cuff than the one that is
included in this box. Please call A&D Medical at 1-888-726-9966 (in Canada
please call 1-800-461-0991) for more information on our alternate cuff sizes.
1 2 3
1 - 2cm
(0.5'')
22 - 32cm
8.6" - 12.6"
E-9
BRAND
A&D Medical (Toll-Free): 1-888-726-9966
The UA-1030T blood pressure monitor has a built-in clock that gives you the time
and date and can tell you when a blood pressure reading stored in memory was
taken. We recommend that you adjust the clock prior to use. To adjust the clock,
follow these simple steps:
1. Press the clock button located to the right of the display.
2. Use the arrow buttons to set the year.
3. After reaching the desired year, press the clock button
4. Repeat the process for the month, day and hour.
5. The next setting will be for pressure.
1. After setting the year, month, day and hour, the next mode is the pressure
setting.
2. Default is , which stands for automatic.
3. For even more rapid readings, you can adjust the default to about 30 mmHg
or more above your expected systolic pressure.
4. Use the arrow buttons to set the pressure.
5. After reaching the desired pressure, press the clock button
6. The next setting will be for TriCheck
In Canada - Auto Control Medical (Toll-Free): 1-800-461-0991

ADJUSTING THE CLOCK

again.

ADJUSTING THE PRESSURE

again.
™
Mode.
E-10