Black 1-9/16" Flat Head Screw - Sauder 427015 Manuel D'instructions

Step 16 Step
1

BLACK 1-9/16" FLAT HEAD SCREW

D570
Groove
å
Fasten the DRAWER SIDES (D569 and D570)
to the DRAWER BACK (D571). Use two
BLACK 1-9/16" FLAT HEAD SCREWS (30S).
3
30S
å
Fasten the DRAWER BOX FRONT (D572) to the
DRAWER SIDES (D569 and D570). Use two
BLACK 1-9/16" FLAT HEAD SCREWS (30S).
å
NOTE: Be sure the DRAWER BOTTOM (B57) inserts
into the groove of the DRAWER BOX FRONT (D572).
Page 22
30S
(4 used in this step)
D571
D569
D570
D572
2
D570
With the palm of
your hand, tap
the DRAWER
BOTTOM down
into the groove.
å
Slide the DRAWER BOTTOM (B57) into the grooves
in the DRAWER SIDES (D569 and D570) and
DRAWER BACK (D571).
B57
427015
D571
B57
Be sure the DRAWER
BOTTOM inserts into the
DRAWER BACK groove.
D569
30S
www.sauder.com/service
D569