Operation Precautions - Nikon FSB-UC Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20

Operation Precautions

Jp
・ Depending on the type of camera, its position, or zoom setting, vignetting may occur. Vignetting may
En
not completely disappear. Carefully adjust the camera position so that vignetting is minimized.
・ When replacing batteries or recording media, the camera may or may not need to be removed from the
Fr
connected equipment depending on the camera. Either way, confirm alignment after replacing them.
De
・ Do not carry or transport the bracket while it is mounted on equipment. This may result in it falling.
It
・ There are many adjustable parts on this product. Before using it, thoroughly read about each of the
Se
adjustment/fixing screws and functions to ensure correct use.
・ Because this product contains various movable metal parts, take care during use to avoid pinching
Fi
your fingers and advise children to take special care.
No
Dk
Shooting Precautions
・ Focus first using the focus ring on the Fieldscope/EZ-Micro you are using by viewing the camera's LCD
monitor, then make fine adjustments with the camera's AF (autofocus) function.
・ If you cannot focus on the subject using the camera's AF, lock the AF by pressing the shutter release
button halfway, then set the focus again using the focusing ring of the Fieldscope/EZ-Micro while
viewing the camera's LCD monitor.
・ With high-magnification shooting, the depth of field is shallow. Be sure to focus carefully.
・ When using the supplied cable release, slowly push to release the shutter. If you push too strongly, the
camera position may change.
・ With high-magnification shooting, you can prevent vibration by using a self-timer or remote switch.
・ If you notice external light on the LCD monitor or image (picture), use the supplied light shielding
rubber sheet to prevent light entering between the mount and lens of the camera. If lights still enter,
cover the whole equipment with a shield such as a black cloth.
・ Camera position may become misaligned during camera operation. Before releasing the shutter,
confirm the vignetting and adjust the camera if necessary.
・ Do not use flash when shooting.
12

Publicité

Table des Matières
loading

Table des Matières