Polarizing Set (Optional) - Optika Italy B-150 Serie Manuel D'instructions

7.7

Polarizing set (optional)

1. Place the polarizer on the light exit ① at the base
of the microscope. (Fig. 5)
2. Loosen the head fixing knob ② and remove the
head from the microscope frame. (Fig. 6)
3. Insert the analyzer ③ into the hole inside the fra-
me. (Fig. 7)
4. Put back the head into its original position and
lock the fixing knob.
③
Page 11
①
Fig. 5
②
Fig. 6
Fig. 7