Hendi 265000 Mode D'emploi page 5

Preparations before using for the first time
• Unpack the appliance carefully and remove all
protective packaging and wrapping. Make sure
no packaging debris remains on the appliance.
• Check delivery contents for any missing parts
and any possible transport damage. In the event
of damage in transit or missing parts, contact
your supplier immediately.
• Place the appliance on a horizontal, stable and
heat resistant surface. Leave at least 15 cm of
space around and above the appliance for venti-
lation purposes.
Technical specifications
Item no.: 265000
Operating voltage and frequency:
220- 240V~ 50/60Hz
Rated input power: 500W
Remark: Technical specification is subjected to change without prior notification.
Operation
• Fill the container with water.
• Connect the power plug with a suitable electri-
cal outlet. Make sure the electrical power supply
voltage rating corresponds with the power supply
details shown on the appliance rating label.
• Turn ON the appliance by pressing the green ON/
OFF switch.
Note:
• Only water can be poured into the container.
After use
• Turn OFF the appliance by pressing the green
ON/OFF switch.
• Unplug the appliance from the electrical outlet.
Cleaning and maintenance
• Always remove the plug from the socket before
cleaning the appliance.
• Beware: Never immerse the appliance in water
or any other liquid!
• Clean the outside of the appliance with a damp
cloth (water with mild detergent).
• Never use aggressive cleaning agents or abra-
sives. Do not use any sharp or pointed objects.
• Let the appliance heat up for 10 ~ 15 minutes at
the highest temperature (85ºC) (See --> Opera-
tion) to remove all residues from the manufactur-
ing process. It may also emit some odour for the
first few cycles. This is normal and does not lead
to defect or hazard.
• Let the appliance & water cool down completely
before cleaning for further use.
Protection class: Class I
Waterproof protection class: IPX3
Dimension: approx. 240 x 300 x (H) 385 mm
• Select the temperature by turning the tempera-
ture control. Then, orange indicator lights up.
• Once the set temperature is reached, the orange
indicator will go off automatically.
• Now, you are ready to put the sausages into the
basket for heating.
• Check the water level regularly during operation.
Add water if the water level below 1cm.
• Allow the appliance & water to cool down.
• Take care when pouring out the water.
Do not use petrol or solvents! Clean with a damp
cloth and detergent if necessary. Do not use
abrasive materials.
• Clean the ventilation slots (if applicable) with the
vacuum cleaner.
• Regularly descale the bottom of the water con-
tainer.
EN
5