Installation Of The Minimy Infrared Cabin; Tools Required - Harvia sentiotec MiniMy 120 Basic Instructions De Montage Et Mode D'emploi

Instructions for installation and use

4. Installation of the MiniMy infrared cabin

Before you begin work, check the parts list to ensure that all the individual parts
have been delivered. If you discover any missing parts, notify your dealer within
14 days of receiving the sauna cabin.
You need an assistant for assembly.
We also advise you to pre-drill the holes for the screws.

4.1. Tools required

● Hammer with a wooden head or a mallet
● Cordless screwdriver with bits for cross-head screws and Torx
● Roller tape measure
● Spirit level
● Punch or wood blocks, 12 mm
● Allen key, 1.5 mm
This symbol indicates tips and useful information
Pre-drill
Cut to real measurement with backsaw
Check the right angle:
80 cm
p. 8/40