Harvia sentiotec MiniMy 120 Basic Instructions De Montage Et Mode D'emploi page 66

Instructions for installation and use
Connecting the LED strip
Fig. 25: Connecting the LED strip to the control unit
When connecting the LED strip, note the arrow on the connector. This must
be on the side of the strip imprinted with "+12 V". The mains plug of the
LED lighting must be located outside the cabin.
Place the power supply unit of the LED lighting under the bench. Guide the con-
nection cable and the mains plug through the opening in the rear wall to the
outside.
p. 26/40