Polishing; Touch-Up Cleaning Hints - HydraMaster TREADMASTER 100-100-001 Mode D'emploi

POLISHING

Pull the pad holder lift arm back toward the machine and down (see Figure 16). This
lowers the polishing pad to the tread surface and simultaneously lifts the brush bristles
from the grooves.

TOUCH-UP CLEANING HINTS

Perform these simple steps to prolong the service life of your equipment and reduce
replacement costs:
1. Disconnect the hose from the vacuum head and attach the crevice tool.
2. Before moving the unit, vacuum the loose dirt (which was created by the scrubbing
action of the brush) from around the cleaning head.
3. Raise the head assembly and vacuum off the pad surface and the brush.
TreadMaster Information and Operating Instructions - 26
EN