Transporting/Storing The Treadmaster - HydraMaster TREADMASTER 100-100-001 Mode D'emploi

TRANSPORTING/STORING THE TREADMASTER

To move or store the TreadMaster:
1. Turn off the TreadMaster.
2. Unplug the cord from the power source and the TreadMaster.
3. Store the cord and the escalator cleaning sign in the storage compartment.
4. Attach the latching bail handle to the end of the housing assembly's handle as
shown in Figure 7.
5. Position the TreadMaster in the upright position.
Figure 7. Attach Latching Bail Handle to Housing Assembly's Handle
TreadMaster Information and Operating Instructions - 18
Latching Bail
Handle
and Position TreadMaster in Upright Position
EN