Figure 4. Position Pad Holder Lift Arm On Head Assembly - HydraMaster TREADMASTER 100-100-001 Mode D'emploi

3. Position the housing assembly's lift arm onto the head assembly, aligning the
mounting holes on the lift arm with the fasteners on the head assembly (see
Figure 5).
Figure 5. Position Pad Holder Lift Arm on Head Assembly
4. Secure the head assembly to the lift arm by re-installing the two fluted knobs.
TreadMaster Information and Operating Instructions - 16
Lift Arm
EN
Lift Arm
Latching Bail
Handle