Operation; Figure 15. Set Lift Arm In Up Position - HydraMaster TREADMASTER 100-100-001 Mode D'emploi

EN

OPERATION

1. To seat the cleaning brush in the grooves, set the polishing pad holder lift arm in the
"up" position (see Figure 16).
2. Attach the warning sign to the crossbar handle (see Figure 12).
3. Plug in the power cord at the machine receptacle first; then, plug the cord into the
nearest rated outlet.
4. Prior to starting the escalator/moving sidewalk, review Steps 2 – 11 on pages
21 – 24.
5. Turn on the TreadMaster's power switch (see Figure 11).
6. Turn on the escalator and again make sure the direction of travel is away from the
TreadMaster.
For first-time cleaning, HydraMaster recommends that the unit be allowed to run
for 1 hour for optimum results.
Figure 16. Set Lift Arm in Up Position
25 - TreadMaster Information and Operating Instructions
Polishing Pad
Holder Lift Arm