Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
INSERTING A DIFFERENT BRUSH INTO HEAD ASSEMBLY
If you want to replace a brush — for example, in the case of removing the nylon grit brush
and replacing it with the Soft brush for painted escalators — follow these steps:
1.
Turn off the TreadMaster.
2.
Loosen the thumb screw on the head assembly (see Figure 6).
Slide Brush Out of
Head Assembly
Figure 6. Loosen Thumb Screw and Slide Brush Out of Head Assembly
3.
Slide the brush out of the head assembly.
4.
Insert the new brush.
5.
Tighten the thumb screw.
6.
Turn on the TreadMaster and resume cleaning.
17 - TreadMaster Information and Operating Instructions
Thumb Screw
Publicité
Chapitres
Table des Matières
