Faceplate Installation; Template Removal; Faceplate, Hinge, Ash Lip And Air Control Arm Installation - Napoleon HIGH COUNTRY 3000H-1 Manuel D'installation Et D'utilisation

fi nishing
EN
6.3

faceplate installation

template removal

6.3.1
Template

faceplate, hinge, ash lip and air control arm installation

6.3.2
WARNING
!
• Prior to installation, ensure the catalyst temperature monitor is installed. See "catalyst temperature monitor
installation" section for details.
note:
The FPWI3-H faceplate is shipped with the upper
and lower grilles assembled. Remove both grilles
before proceeding.
A. Assemble the air control arm by removing the 2nd
screw, rotating the arm in line and re-installing the
screw.
B. Install the ash lip.
24
W415-2044 / 02.14.20
Remove the screws and template,
discard only the template once all the
facing material has been installed.
Retain the screws for installing the
faceplate.
1
AIR
CONTROL
3
SLOT
FRONT ARCHED
PANEL
2
ASH LIP X 3
X 9