Input Air Connection - ESAB ESP-101 Manuel D'instruction

SECTIoN 3 INSTallaTIoN

3.5.2 Input air Connection

Connect your air supply to the inlet connection of the filter/regulator.
Pre-filtered DRY AIR SUPPLY (Customer Supplied)
(90 - 150 psi / 6.2 - 10.3 bars)
Replace fuse with Slo-Blo, 2 Amp, 600 V only
WarNINg
MaKE SurE ThE PoWEr SourCE IS
SWITChED off BEforE rEMoVINg fuSE.
figure 3-4. Input Connections / fuse replacement
20