Publicité
Les langues disponibles
Les langues disponibles
Seat Ibiza
04/2002 - ....
Ref. 1357
Fitting instructions
1)
Remove the bumper and the coating of the wheel casings. Detach the exhaust at the back and permanently
remove the metal buffer beam.
2)
Insert the supports of the tow bar at the back in the chassis beams till points (A) fit the provided holes in
the outside of the chassis beam.
Insert the washers and bolts and slide the tow bar as far as possible in the chassis beams. Tighten firmly.
3)
Make an incision in the bumper according to the enclosed drawing and put the bumper back on its
original place.
4)
Install the (*) and also tighten firmly.
Composition
1 tow bar reference 1357
1 ball T43M002
4 bolts M12x35
4 safety washers M12
4 bolts M10x35
4 safety washers M10
4 washers DIN9021-M10
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
(*)
(*)
(*)
(A)
(A)
(A)
All bolts and nuts : quality 8.8
Publicité
