Functioning Description - Fama TS 12 Manuel D'utilisation

FUNCTIONING DESCRIPTION

The control devices are designed and manufactured so as much sure and reliable and resistant to the service normal stresses, to
the foreseeable strains and to the external agents. Besides they are clearly visible, locatable and marked from a suitable
marking. Here follow the main control devices are showed:
TYPE / COLOR
button / black
Button / white
STARTING
The machine starting is possible only with a voluntary action on the control device foreseen for this aim: white button "I" for
the machine starting control.
NB. In the TI 32R model the starting is possible only with the inserted hopper and correctly positioned.
STOP
For the stop control push the black button "0". In case of momentary or extended stop, before to get in function the machine,
all food products must be removed within the machine: follow the indications relative to the grinding group disassembly.
FUNCTIONING SAFETY
If the machine is under stress, or is submitted to too long functioning times or submitted at overloaded, the same stops
immediately for the thermal protection functioning. In this case wait that it is completely cooled before proceeding to the
starting function. The TI 32R model has a safety device on the hopper. The incorrect positioning or the hopper lacked use
involves the machine not functioning.
VOLTAGE LACKING
In case of electric feeding breaking or if the machine is disconnected from the electric net, this last one will be able to be
restarted only following the starting function, after the electric feeding back or the reconnection to the electric net.
CONTROLS AND VERIFICATIONS BEFORE STARTING
VERIFICATION / CONTROL BEFORE
THE STARTING
Check that:
Extraneous objects aren't on the machine,
inside the hopper, inside the machine neck
Check the cleaning:
Of the machine neck internal parts
and of the grinding group
Of the pusher
of the machine external surface
Check the integrity:
of the fixed protections,
of the loading hopper,
of the machine neck,
of the machine body
o
Check the functionality:
of the control system parts / safety
control;
Of the control devices.
Check the absence:
Of strange noises after the starting
Check the absence:
Of oil trails both on the machine
support ground both in the
Archimedean screw
For any intervention type or for the parts change that are damaged, activate the maintenance service. The possible change must
happen with manufacturer original products or at least of quality, safety and equivalent characteristics. For analysis contact the
Authorized Assistance Center.
"0" / button for the machine stop control
"I" / button for the machine start control
Sight control of the indicated parts, to check of objects or extraneous bodies lacking as for
example different tools, clothes, etc... and that there isn't however the food product.
In case of presence, provide with their removal.
All indicated parts surfaces, before the machine use must be checked visually to verify their
cleaning.
For the sight check of the grinding group internal parts, provide with its disassembly.
In case of molds presence or other type of dirtiness, provide with the cleaning procedure in
accordance with the chapter 5 indications
All fixed protections, etc.., must perform the function for which have been foreseen.
Indicated parts sight check to verify their integrity in their surface external part.
The parts must be however changed at the first erosion signals or breaking.
All devices must perform the function for which have been foreseen. Control directly the
devices so that these ones determine the waiting function.
The actuators and all parts must be however changed to the first erosion signals or breaking.
During the functionality checking of the control devices, if there are strange noises, due for
example to a seizing or mechanical breaks, stop immediately the machine and activate the
maintenance service.
Both during the working, both at the end of every work, both in the assembly moment of the
grinding group, check the oil trails absence in the indicated parts. If there are some fluid drops
stop immediately the machine and activate the maintenance service.
ORIGINAL INSTRUCTIONS TRANSLATION
REFERENCE / DESCRIPTION
MODALITY AND CHECKS
Pag. di
13 18