UNIT ASSEMBLY AND USAGE
8. Assemble the nebulizer. Gently twist the top and bottom sections together.
Make sure the two sections fit securely.
9. Securely attach the mouthpiece or mask to the top section of
the Jet-Air nebulizer as illustrated.
10. Place the nebulizer on the nebulizer clip on the front of
the compressor.
11. Plug the power cord into the correct voltage electrical outlet.
Remove the nebulizer from the nebulizer clip.
Turn the compressor on.
12. Begin treatment according to your physician's and/or
respiratory therapist's instructions. Medication is
dispensed as you tilt the nebulizer towards your mouth.
13. When treatment is complete, turn the compressor off
and immediately unplug the unit from the electrical outlet.
14. Clean and store the nebulizer and compressor as directed
in this instruction manual.
7