Repeat Play; Random Play - LENCO TCD-973 Mode D'emploi

Lecteur cd/mp3 avec platine stereo, radio et encodeur usb/sd
Table des Matières

Publicité

REMARK:-
- IN THAT CASE OF NO NAME HAD BEEN ASSIGNED FOR THE TRACK, " NONE " OR " UNKNOWN " IS BEING
DISPLAYED" ON DISPLAY (18).
- THE LCD DISPLAY SUPPORT ENGLISH LANGUAGE ONLY
MP3/WMA TRACK FORMAT REQUIREMENT:-
MP3 BIT RATE : 32 KBPS~256 KBPS AND WMA BIT RATE : 32 KBPS ~ 320 KBPS
-
-
THE PERFORMANCE OF PLAYING MP3 DISC IS VARIOUS FROM THE QUALITY OF RECORDING DISC AND
THE METHOD OF RECORDING. FURTHERMORE, THE SEARCHING LEAD-TIME FOR MP3-CD IS LONGER
THAN NORMAL CD DUE TO DIFFERENCE FORMAT.
REPEAT/INTRO/RANDOM MODE
PRESS THE REPEAT/INTRO/RANDOM BUTTON BEFORE OR DURING PLAYBACK, A SINGLE TRACK, SINGLE
FOLDER (MP3 ONLY) OR ALL THE TRACKS CAN BE PLAYED IN DIFFERENCE MODE AS FOLLOW:-
FOR CD
(1) REPEAT 1
PLAY MODE
REPEAT TRACK
REPEAT ALL
INTRO
RANDOM
OFF MODE
FOR MP3/WMA DISC
(1) REPEAT 1
(6) OFF MODE
PLAY MODE
REPEAT SINGLE TRACK
REPEAT ALL TRACKS
REPEAT SINGLE FOLDER
INTRO PLAY MODE
RANDOM MODE
OFF MODE

REPEAT PLAY

YOU CAN LISTEN THE DESIRED TRACKS OR FOLDER REPEATEDLY BY THIS FUNCTION.
INTRO PLAY (BY REMOTE CONTROL)
YOU CAN LISTEN THE BEGINNING (10 SECONDS) OF EACH TRACK IN A CD BY THIS FUNCTION & SAVING
YOUR TIME TO SEARCH THE DESIRE SONG

RANDOM PLAY

YOU CAN LISTEN ALL THE TRACKS OR FOLDER IN A RANDOM ORDER BY THIS FUNCTION
CD DISC PROGRAMMING (BY REMOTE CONTROL)
UP TO 32 TACKS CAN BE PROGRAMMED FOR CD OR MP3 FILE AND PLAY IN ANY ORDER. BEFORE USE, BE
SURE THE SYSTEM IS AT STOP MODE BEFORE PROGRAMMING:-
1.
SET IN CD/USB MODE & STOP THE CD PLAYBACK.
2.
PRESS THE "PROGRAM" BUTTON, " PROG " WILL APPEAR ON LCD DISPLAY (18). MOREOVER, IT WILL
INDICATE PROGRAM NO. AND DIGITS FOR TRACK NO. TO BE PROGRAMMED.
3.
SELECT A DESIRED TRACK BY PRESSING SKIP
4.
PRESS THE " PROGRAM " BUTTON TO STORE THE TRACE INTO MEMORY.
5.
REPEAT STEPS 3 AND 4 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY.
6.
WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS CD " PLAY/PAUSE/STOP "
BUTTON (2) TO PLAY THE DISC IN ASSIGNED ORDER.
7.
TO CANCEL THE PROGRAMMED FILE, PRESS "STOP" BUTTON ON REMOTE HANDSET UNTIL " PROG " IS
DISAPPEAR ON LCD DISPLAY (18)
(2) REPEAT ALL TRACK
INDICATOR
ON LCD DISPLAY
ALL
INTRO
RANDOM
--------------
(2) REPEAT 1 FOLDER
(5) RANDOM
INDICATOR
ON LCD DISPLAY
ALL
INTRO
RANDOM
-----------------
(3) INTRO
(4) RANDOM
(3) REPEAT ALL FOLDER
(4) INTRO PLAY
OR
BUTTONS (3).
GB-3
(5) OFF MODE

Publicité

Table des Matières
loading

Table des Matières