Table des Matières
Publicité
Skoda Fabia 5d
'00 - ....
Ref. 1214
Fitting instructions
1. Disassemble the bumper and remove definitively the metal buffer beam.
2. Install the tow bar with the supporting arms in the deliberated holes at the back of the vehicle in the
chassis beams, points (A) fit with the provided holes in the side of the chassis beam. Those holes are
covered with tape that you have to remove. Insert the bolts and the washers and do tighten everything
firmly (see tension).
3. Make an incision in the bottom of the bumper,
Attention:
Reassemble the bumper.
4. Assemble the ball together with the security shackle and the socket plate holder, insert the bolts and do
tighten everything firmly (see tension).
Note
Please consult your cardealer or owners manual for the maximal permissable towing mass.
Remove any bitumen coating on the fastening position for the tow bar.
When drilling, be carefull not to damage any brake lines, electrical wiring or fuel lines.
models from 2000-2006: use drawing 1
models as from 2007:
use drawing 2.
Publicité
Table des Matières
