Hardware Installation - Belkin OmniView PRO Guide De L'utilisateur

P72895_F1D104-OSD-univ_man.qxd
CONSOLE
Keyboard,
mouse and
monitor
The OmniView
™
giving the user control over a maximum of 16 computers!
Each OmniView ™
BANK numbers range from 0 to 3, for a total of 3 BANKs. BANK 0 is the MASTER bank, while
banks 1 through 3 are slave banks. The MASTER bank is the unit that connects to the console
keyboard, mouse, and monitor.
The DIP switches must be set correctly for proper identification and usage. See the next
section for the actual settings. If you are using the OmniView
configuration, it must be set as the MASTER (BANK 0). If it is to be used as a slave unit,
then it must be set to any unused unique bank number from 1 through 3.
7/16/01 3:24 PM

Hardware Installation

Bank 0 (Master)
Bank 1 (slave)
Bank 2 (slave)
Bank 3 (slave)
PRO has the capability to be daisy-chained to 3 more units (for a total of 4),
PRO unit is defined as a BANK. See diagram above for more information.
Page 5
1 2 3
5 6 7
9 10 11
13 14 15
PRO in a single-unit
™
5
4
8
12
16
En