Belkin OmniView PRO Guide De L'utilisateur page 16

P72895_F1D104-OSD-univ_man.qxd
CONSOLE
Keyboard,
mouse and
monitor
AutoScan Mode:
In AutoScan mode, the OmniView
switching to the next. This time interval is set in the On-Screen Display menu.
NOTE: There is no mouse or keyboard control in this mode. This is necessary to prevent
errors. Otherwise, if the user is moving the mouse or using the keyboard when the
OmniView
erratic mouse movement and/or the wrong characters to show up when using
the keyboard.
To get out of AutoScan mode, press the SPACEBAR.
7/16/01 3:24 PM
Usage
Bank 0 (Master)
Bank 1 (slave)
Bank 2 (slave)
Bank F (slave)
Enable AutoScan mode
™ PRO remains on one port for a number of seconds, before
™ PRO switches to the next port, data flow is interrupted and will cause
Page 12
(continued)
1 2 3
5 6 7
9 10 11
13 14 15
12
4
8
12
16