Belkin OmniView PRO Guide De L'utilisateur page 12

P72895_F1D104-OSD-univ_man.qxd
5.
Connect the first computer's mouse cable to the OmniView
(Belkin Part# F2N036-XX), connect one end to the PS/2 mouse port on the computer,
and the other end to the PC1 PS/2 mouse port on the back of the OmniView
using a serial mouse cable (Belkin Part# F2N209-XX-T), connect one end to a DB9 serial
port on the computer, and the other end to the PC1 DB9 serial mouse port on the back
of the OmniView
Back of OmniView
6.
Connect the first computer's keyboard cable to the OmniView
PS/2 cable (Belkin Part# F2N036-XX), connect one end to the PS/2 keyboard port on
the computer, and the other end to the PC1 keyboard port on the back of the
OmniView
PS/2-AT keyboard adapter (Belkin Part# F2N018).
Back of OmniView
7.
Double check all of the connections. Make sure the keyboard and mouse cables go to
the correct ports.
8.
Repeat steps 4-6 for the remainder of the computers.
9.
Attach the power supply to the power supply connector at the back of the OmniView
PRO. Plug this into any available AC outlet. You should see the LED for Port 1 on the
front panel blink, and hear a beep. Power up your monitor.
10.
You can now power up all your computers simultaneously. The first computer will
show up on the monitor. Check to see if the keyboard, mouse and monitor work. If this
is okay, press the CHANNEL button and check the functionality of the other computers.
If you find any errors, double-check all of the cable connections.
7/16/01 3:24 PM
Hardware Installation
™ PRO.
™ PRO
F2N036-XX for PS/2 mouse
OR
F2N209-XX-T for serial mouse
™ PRO. If your computer has an AT-style keyboard port, you will need a
PRO
™
Page 8
(continued)
™ PRO. If using a PS/2 cable
™ PRO. Using another
F2N036-XX
8
™ PRO. If
Back of PC
Back of PC
™