Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installing spoke mount wheel reflectors
1.
Position the reflector (1) near the hub of the wheel and align both ends of the reflector to the
spokes (4). Make sure that the spokes clip into the brackets (2) located on both ends of the reflector.
2.
Gradually push the reflector (1) towards the rim (3) until the reflector is firmly held in place by the
tension from the spokes (4) at either side of the reflector.
3.
Repeat steps 1 and 2 when installing a spoke mount wheel reflector on the other wheel.
1
2
3
1.
Reflector
2.
Brackets
3.
Rim
4. Spokes
4
21
Publicité
Table des Matières
