Reflectors
Your bicycle is supplied with one front (white), one rear (red), two wheel (white) reflectors, and
four pedal (orange) reflectors.
Reflectors are an important safety and legal requirement and should be securely attached and in
good condition at all times. Periodically inspect all reflectors, brackets, and mounting hardware
for signs of wear or damage. Immediately replace anything damaged.
Some bicycles will require you to install reflectors onto the bicycle. Refer to the following sections
for instructions on installing bicycle reflectors.
WARNING: Reflectors are important safety devices which are designed as an integral
part of your bicycle. Regulations require every bicycle to be equipped with front,
rear, wheel, and pedal reflectors. These reflectors are designed to pick up and reflect
street lights and car lights in a way that helps you to be seen and recognized as a
moving bicyclist. Check reflectors and their mounting brackets regularly to make
sure they are clean, straight, unbroken, and securely mounted. Have your dealer
replace damaged reflectors and straighten or tighten any that are bent or loose.
18