Operating Instructions; Operating Touch Display Panel - Napoleon purview 42 Serie Manuel D'installation Et D'utilisation

Once the appliance has been plugged into a grounded electrical outlet or hard-wired
note:
Ensure the house circuit breakers for the power supply are turned on. In the event of a power failure, the
appliance will lose its memory function and will reset to factory mode when the power returns.
6.1

operating touch display panel

WARNING
!
• Do not move or remove the glass panel, when the appliance is plugged in and operating. This will cause the
remote control and touch panel to no longer function.
The touch display panel is shown by LED's on the bottom right corner of the appliance. The LED's will
disappear after 3 seconds of no function change. The Main Power button will disappear.
to a dedicated 220-240V power supply, it is ready to operate.
Control Panel

6.0 operating instructions

EN
23
W415-2803 / B / 06.01.20