Cleaning; Maintenance Intervals; Maintenance Interval Table - Deltafox DG-ECS 2240 Traduction De La Notice D'utilisation Originale

Cleaning

• Clean the machine thoroughly after
every use. In this way, you extend the
life of the machine and avoid accidents.
• Keep the gripping handles free of pet-
rol, oil or grease. Clean the gripping
handles, where appropriate, with a
moist cloth soaked in soap. Use no sol-
vents or petrol for cleaning!
• Clean the saw chain after every use. Use
a paint brush or wipe for that. Do not
use any liquids to clean the chain. After

Maintenance intervals

Regularly carry out the maintenance operations listed in the following table. The life of
the saw is extended by regular maintenance of your chainsaw. Furthermore, you get
optimum cutting performance and avoid accidents.

Maintenance Interval Table

Machine part
Components of the chain
brake
Sprocket chain wheel (
24)
A
Saw chain ( 5)
A
Saw chain ( 5)
Guide bar ( A 4)
Guide bar ( A 4)
Oil automatic system
cleaning, oil the chain lightly with chain
oil.
• When cleaning, also remove the chain
wheel cover (
be cleaned as well.
• Clean the chain bar (Guide) (
• Clean the ventilation slots and the
surfaces of the machine with a paint
brush, whisk or dry cloth. Do not use
any liquids for cleaning.
• Clean the oil passages of the chain bar
(
free, automatic oiling of the saw chain
during operation.
Action
Check, replace if required
Check, replace if required
Check oil, regrind or re-
place if required
Clean and oil
Check, clean and oil
turn around
check and, where
appropriate, clean oil
outflow duct
A 8) so that this area can
26), in order to guarantee a trouble-
Be-
fore
every
use





GB
A
4).
After 10
After
hours of
every
opera-
use
tion



49