Function Description; Technical Data; Notes On Safety - Deltafox DG-ECS 2240 Traduction De La Notice D'utilisation Originale

GB

Function description

The chainsaw is driven by an electric mo-
tor. The circulating chain is led around a
saw bar (guide rail).
The tool is fitted with a rapid-action
chain-tensioning system and a fast-acting
chain brake. An automatic oil dosing
regulator ensures continuous chain lubri-
cation.
The chainsaw is equipped with various
protection fittings for the protection of the
user.
Refer to the following descriptions for the
function of control elements.

Technical Data

Electrical chainsaw ......... DG-ECS 2240
Rated input
voltage U .....................230-240 V~, 50 Hz
Input power P ............................... 2200 W
Safety class .........................................
Protection category ........................... IPX0
Chain speed v ............................15.3 m/s
0
Weight
(without guide rail and chain)...........4.3 kg
Weight (with guide rail and chain) ....5.0 kg
Oiltank ...............................approx. 270 ml
Chain ....................... TRILINK CL15056PB
Chain bar .... TRILINK 16"M1501656-1041
Chain link separation ......... 3/8" (9,53 mm)
Chain width .................................1,27 mm
Teeth of the sprocket chain wheel ...........6
Length of the chain bar ................454 mm
Sawing length ...............................395 mm
Acoustic pressure level
(L ) ..................... 94.1 dB (A); K
pA
Sound power level (L
measured ... 104.8 dB (A); K
guaranteed .............................107 dB(A)
Vibration (a ) ..........3.22 m/s
h
Noise and vibration values were deter-
34
= 3 dB
pA
)
WA
= 2.49 dB
WA
; K= 1.5 m/s
2
mined according to the standards and
stipulations mentioned in the declaration
of conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting
the working hours. For this pur-
II pose all parts of the operating cy-
cle have to be considered (for ex-
ample, times when the electric tool
is switched off and times when it
is switched on but running without
any load).

Notes on safety

This section deals with the basic safety
regulations while working with the electric
chainsaw.
An electric chainsaw is a danger-
ous device, which can cause
serious or even fatal injuries with
incorrect or careless use. Thus, for
your own safety and the safety of
others, you should always take
note of the instructions on safety
2
and, in case of difficulties, consult
a specialist for advice.