Selection Of Pedal Assistance Level; Switch On And Off The Lights Of The Bicycle And The Backlight Of The Display Panel; Selection Of Display Information; Battery Level Indicator - BH Easy Motion Neo Manuel De L'utilisateur

3. Selection of pedal assistance level

The selection of pedal assistance has 5 levels (including the unassisted mode). To switch between assistance levels, the
user will push the SET button as many times as it is necessary until the desired assistance level appears in the display
panel, as shown in the next diagram.
By default, when starting the system, the assistance level will be the same level set before the system was last switched
off.
In Eco mode, the energy supplied is minimal. It provides higher autonomy with a lower assistance ratio. In Boost mode,
pedal assistance is maximum, with a ratio of 1:3 (user's force: motor force), and as a result the action ratio will be
significantly reduced.
During a trip, a suitable selection of assistance modes considering the surface or pedalling conditions encountered will
provide you an optimum ratio between battery economy and pedalling comfort.

4. Switch on and off the lights of the bicycle and the backlight of the display panel

The lights of the bicycle and the backlight of the display panel can be switched on and off by pushing the (+) button.
At the moment of switching on the lights, next indicator will be shown in the display:

5. Selection of display information

The display panel allows the user to see different information. The user may switch among the next options by pushing
the (-) button:
- Total distance (km).
- Total time (hh:mm).
- Average Total Speed (km/h).
- Trip distance (km).
- Trip time (hh:mm).
- Average Trip Speed (km/h).
For reseting the trip information to zero, the user will push (-) button for 3 seconds.

6. Battery level indicator

The battery level presents the following states:
U S E R M A N U A L
EN
2 5