Calibrating And Initial Start Up - Powerworks P3 Manuel D'utilisation

Installation

Calibrating and Initial Start Up

Secure the charging station to the ground using the five supplied fixing
screws using a 6 mm hex key.
NOTE: Do not make new holes in the charging station base plate. Only
the existing holes may be used to secure the base plate to the ground.
NOTE: Do not step or walk on the charging station base plate.
Check the LED indicator on the charging station:
•
LED indicator lights up continuously green, if the output voltage
of the power supply is available and the boundary wire is not
interrupted.
The LED indicator does not light up when the output voltage of the
power supply is not available.
If the indicator LED does not show a solid or green light, see Indicator
LEDs on the Charging Station on page 24 for troubleshooting.
Pair the mower with Mobile App as instructed in Pairing Mobile App to
Mower on page 19.
POWERWORKSTOOLS.COM 17
Version 1 - 2020.12.30
EN