Pumped Liquids; Applications; Technical Data - Saci pumps EVOPLUS SMALL Instructions Pour L'installation Et La Maintenance

Mains terminals and motor terminals may still have dangerous voltage when the
motor is stopped.
If the power cable is damaged, it must be replaced by the technical assistance service
or by qualified personnel, so as to avoid any risk.

3. PUMPED LIQUIDS

The machine has been designed and made for pumping water, free from explosive substances and solid
particles or fibres, with a density of 1000 Kg/m³, a kinematic viscosity of 1mm²/s and non chemically
aggressive liquids. It is possible to use ethylene glycol in a percentage of no more than 30%.

4. APPLICATIONS

EVOPLUS SMALL series circulators allow integrated adjustment of the differential pressure which enables
the circulator performance to be adapted to the actual requirements of the system. This determines
considerable energy saving, a greater possibility of control of the system, and reduced noise.
EVOPLUS SMALL circulators are designed for the circulation of:
– water in heating and conditioning systems.
– water in industrial water circuits.
domestic water only for the versions with bronze pump body.
–
EVOPLUS SMALL circulators are self-protected against:
Overloads
–
– Lack of phase
Excess temperature
–
– Over-voltage and under-voltage

5. TECHNICAL DATA

Supply voltage
Absorbed power
Maximum current
Grade of protection
Protection class
TF Class
Motor protector
Maximum environment temperature
Liquid temperature
Flow rate
Head
Maximum working pressure
Minimum working pressure
ENGLISH
1x220-240 V (+/-10%), 50/60 Hz
See electrical data plate
See electrical data plate
IP44
F
TF 110
No external motor protector is needed
40 ºC
-10 ºC ÷ 110 ºC
See Table 1
See Table 1
1.6 MPa
0.1 MPa