Saci pumps EVOPLUS SMALL Instructions Pour L'installation Et La Maintenance page 13

The main settings of the system are graphically summed up on the Home Page.
Home Page
The icon at top left indicates the type of regulation selected.
The icon at centre top indicates the operating mode selected (auto or economy).
The icon at top right indicates the presence of a single
The rotation of the icon
At the centre of the Home Page is a read-only parameter which can be chosen from
a small set of parameters on Page 9.0 of the menu.
From the Home Page it is possible to access the page for regulating the contrast
of the display: hold down the hidden button, then press and release the right button.
EVOPLUS SMALL circulators offer a user menu accessible from the Home Page
by pressing and releasing the central "Menu" button.
Page 1.0
The factory settings are set from Page 1.0 by holding down the left and right
buttons at the same time for 3 seconds.
The resetting of the factory settings will be notified by the appearance of the
symbol
The regulating mode is set from Page 2.0. You can choose between the following
Page 2.0
modes:
Page 2.0 displays 3 icons which represent:
Page 3.0
The regulating set-point can be modified from Page 3.0.
Depending on the type of regulation chosen on the previous page, the set-point
to be set will be a head or, in the case of a Constant Curve, a percentage of the
rotation speed.
On page 9.0 it is possible to choose the parameter to be displayed on the Home
Page 9.0
Page:
ENGLISH
or
next to the word "Default".
1. = Proportional differential pressure regulation.
2. = Regulation with constant differential pressure.
3. = Regulation with constant curve with rotation speed set from the
display.

central icon = setting currently selected

right icon = next setting

left icon = previous setting
Measured head expressed in metres
Estimated flow rate expressed in m
Rotation speed expressed in revs per minute (rpm)
Not present
Power distributed expressed in W
Operating hours
Not present
Not present
indicates which circulation pump is operating.
3
/h
or twin inverter .