Factory Settings; Types Of Alarm - Saci pumps EVOPLUS SMALL Instructions Pour L'installation Et La Maintenance

13.

FACTORY SETTINGS

Parameter
Regulating mode
Twin operating mode
Pump start control
Table 2: Factory settings
14.

TYPES OF ALARM

Alarm Code
e0 - e16; e21
e17 - e19
e20
e22 - e31
e32 - e35
e37
e38
e39 - e40
e46
e55
e56
Table 3: List of alarms
15. DISPOSAL
This product or any part of it must be disposed of correctly:
1. Use public or private local systems for waste collection
2. If that is not possible, contact SACI or the nearest authorised service workshop
INFORMATION
Frequently asked questions (faq) on the ecodesign directive 2009/125/ec establishing a framework for the
setting of ecodesign requirements for energy-related products and its implementing regulations:
http://ec.europa.eu/enterprise/policies/sustainable-business/documents/eco-
design/guidance/files/20110429_faq_en.pdf
Guidelines accompanying commission regulations implementing the ecodesign directive:
http://ec.europa.eu/energy/efficiency/ecodesign/legislation_en.htm - see "circulators"
ENGLISH
= Proportional differential pressure regulation
ON
Alarm Symbol
Internal Error
Short Circuit
Voltage Error
Internal Error
Electronic system excess temperature
Low voltage
High voltage
Pump blocked
Pump Disconnected
Dry operation
Motor excess temperature (motor protector trips)
Value
= Alternate every 24h
Alarm Description