Saci pumps EVOPLUS SMALL Instructions Pour L'installation Et La Maintenance page 14

Page 10.0
On page 10.0 you can choose the language in which to display the messages.
Page 11.0
On page 11.0 you can display the alarms log by pressing the right button.
If the system finds any faults it records them permanently in the alarms log (up to a
Alarms Log
maximum of 15 alarms). For each recorded alarm a page composed of 3 parts is
displayed: an alphanumeric code that identifies the type of fault, a symbol that
illustrates the fault in graphic mode, and a message in the language selected on
Page 10.0, giving a brief description of the fault.
By pressing the right button you can scroll through all the pages of the log.
2 questions appear at the end of the log:
Page 13.0
On page 13.0 you can set the system status in ON or OFF.
If ON is selected the pump is always on.
If OFF is selected the pump is always off.
ENGLISH
1. "Reset Alarms?"
Pressing OK (left button) resets any alarms still present in the system.
2. "Delete Alarms Log?"
Pressing OK (left button) deletes the alarms memorised in the log.