Checking The Engine Mechanics - Reely SKY EP Notice D'emploi

For photo-technical reasons, the USB charging cable is illustrated in the wound-up state. Before first use,
the cable retainer should be opened and the cable unwound.
Place the flight battery on a fire-proof underground when charging and do not charge the battery unsuper-
vised.
Do not connect the charging cable to a USB hub without a separate power unit (e.g. a keyboard USB port,
etc.), because these will not provide sufficient current for charging.
The operating system does not recognize any new hardware after connection, because the USB port is
only used for power supply.
Please observe that the USB ports of your computer/notebook are usually only active when the computer/
notebook is switched on.
Therefore, we recommend to only connect the charging cable to a computer/notebook that is switched on.
b) Checking the Engine Mechanics
Before commissioning your model helicopter, you need
to check the drive mechanics.
Only if the mechanics work securely, without play and
absolutely smoothly can be model fly with the lowest
possible energy expenditure. For this reason, you
should check the model function before each flight.
For this, carefully turn the two main rotors back and
forth and check the interaction of the two main gears
(1) and the motor pinions (2). The gears must securely
fit into each other without catching or showing too much
friction. The two motor shafts with the drive pinions must
be aligned perfectly straight and must not be eccen-
tric.
The centrifugal weight rod (3) at the upper rotor must
be aligned precisely straight and its ends must be easy
to move up and down.
The linkage angle of the upper rotor (4) must not be
difficult to move or catch in any position.
Figure 6
39