Switching On The Transmitter - Reely SKY EP Notice D'emploi

b) Switching on the Transmitter
Move the control stick for the pitch and tail functions
(also see figure 1, item 8) to the bottom position right
at your body.
Slide the function switch (also see figure 1, item 6) from
the left position "OFF" to the right position "ON".
The LED indicator (also see figure 1, item 10) is lit red
and indicates that the transmitter is sufficiently supplied
with power.
Attention!
If the power supply is no longer sufficient for a faultless operation of the transmitter, the LED display
flashes red and the transmitter emits a short alarm at regular intervals (every 8 seconds).
In this case, terminate flight operation of the model immediately And insert a new set of batteries in the
transmitter.
Figure 3
37