Operating instructions Powerman Kompakt
Square, rectangular and shaped punches
for hydraulic pump
Description
Dimensions
mm/inch
15,8 x 15,8 / 0.62" x 0.62"
22,2 x 22,2 / 0.87" x 0.87"
Square punch
25,4 x 25,4 / 1.00" x 1.00"
46,0 x 46,0 / 1.81" x 1.81"
22,0 x 30,0 / 0.87" x 1.18"
Rectangular punch
22,0 x 42,0 / 0.87" x 1.65"
25,0 x 50,0 / 0,98" x 1,97"
ø 23,1 x 20,2 / ø 0.91" x 0.80"
Shaped punch
Turning bolt
ø 22,5 x 20,1 / ø 0.79" x 0.69"
Round punch with
ø 22,5 / 0.89"
2 keyways
19,8 x 11,3 / 0.78" x 0.44"
28,2 x 11,3 / 1.11" x 0.44"
Shaped punch
41,9 x 11,3 / 1.65" x 0.44"
58,4 x 11,3 / 2.30" x 0.44"
55,7 x 13,9 / 2.13" x 0.55"
Round, square, rectangular and shaped punches in other dimensions or versions to samples or drawings are available upon request.
8. Maintenance / cleaning
•
The Powerman Kompakt mostly works maintenance-free
•
At regular intervals the unit should be cleaned, and zinc-plated parts should be lubricated
•
Visual and functional inspection of the equipment should be performed weekly
•
Oily rugs and hydraulic oil have to be treated as hazardous waste
9. Troubleshooting and service
If you experience a break-down of the equipment please contact your local sales office or the manufacturer. Here you will receive help and hints to do
smaller repair work yourself. If a complex repair is necessary, this must be performed by our factory-service, as häwa will not assume any liability for
improper repairs and resulting consequential damages.
Service Hotline:
Tel: 770 9213272
Fax: 770 9212896
E-Mail: haewa@haewacorp.com
12
Bolt
Max. sheet metal thickness
mm/ga
ST 37
A2
mm/ga
mm/ga
13 / 0.51"
2,0 / 14
1,5 / 16
16 / 0.63"
2,0 / 14
1,5 / 16
16 / 0.63"
2,0 / 14
1,5 / 16
20 / 0.79"
2,0 / 14
1,5 / 16
16 / 0.63"
1,5 / 16
1 / 18
16 / 0.63"
1,5 / 16
1 / 18
25 / 0,98"
2,0 / 14
1,5 / 16
16 / 0.63"
1,5 / 16
1 / 18
16 / 0.63"
1,5 / 16
1 / 18
16 / 0.63"
1,5 / 16
1 / 18
10,5 / 0.41"
1,75/ 16
1 / 18
10,5 / 0.41"
1,75/ 16
1 / 18
10,5 / 0.41"
1,75/ 16
1 / 18
10,5 / 0.41"
1,75/ 16
1 / 18
12,7 / 0.5"
1,75/ 16
1 / 18
Punch tool
Replacement
Order No.
Alu
Order No.
mm/ga
3,0 / 11
2623-0915-80-00
2623-0710-10-00
3,0 / 11
2623-0922-20-00
2623-0712-10-00
3,0 / 11
2623-0925-40-00
2623-0712-10-00
3,0 / 11
2623-0946-00-00
2623-0119-00-00
2,5 / 12
2623-0922-31-10
2623-0712-11-00
2,5 / 12
2623-0922-42-10
2623-0712-12-00
3,0 / 11
2623-0925-50-00
2623-0118-00-00
2,5 / 12
2683-0920-23-01
2683-0712-12-00
2,5 / 12
2683-0920-22-01
2683-0712-12-00
2,5 / 12
2683-0922-52-00
2623-0712-12-00
2,0 / 14
2683-0000-00-09
2683-0000-38-38
2,0 / 14
2683-0000-00-15
2683-0000-38-38
2,0 / 14
2683-0000-00-25
2683-0000-38-38
2,0 / 14
2683-0000-00-37
2683-0000-38-38
2,0 / 14
2683-0000-00-50
2683-0000-38-12
Replacement
bolt
screw
Order No.
2683-0710-10-02
2683-0710-10-02
2683-0710-10-02
2683-0719-19-01
2683-0000-00-38
2683-0000-00-38
2683-0000-00-38
2683-0000-00-38
2683-0000-00-12