Pioneer DV-626D Mode D'emploi page 23

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Setting analog audio connections
to an AV amplifier or receiver
The [Analog Jacks] screen establishes whether analog
connections have been made to an AV amplifier or
receiver, and if connections are made, whether the
connections made are for 2 channel stereo or for 5.1
channel surround sound.
Audio1
2
Video
Language
Setup Navigator
Amp Connection
Analog Jacks
2 CH jacks for L/R
Move
ENTER
Settings: 2 Channel*
Select if you have made 2 channel
connections to an amplifier or receiver.
5.1 Channel
Select if you have made 5.1 channel
connections to an AV amplifier or receiver with
the appropriate inputs. When this setting is
selected, several screens will follow to
determine the configuration of your speaker
system. These screens are described in the
section 'To coordinate your speaker system
for 5.1 channel output' on this page.
Not Connected
Select if you have not made connections to an
amplifier or receiver or if you have made
stereo connections to a TV or monitor.
All manuals and user guides at all-guides.com
General
2 Channel
5.1 Channel
Not Connected
Select
SETUP
Exit
* Factory setting
To coordinate your speaker system for 5.1
channel output
When "5.1 Channel" is selected in the [Analog Jacks]
screen, the following screens appear to determine the
configuration of your speaker system. In all of the
following screens, select "Present" if the speaker in
question is present in your system, and "Not Present" if
it is not.
[Center Speaker]
Audio1
2
Video
Language
Setup Navigator
Amp Connection
Center Speaker
Center speaker is connected
to an amplifier
Move
ENTER
[Surround Speakers]
Audio1
2
Video
Language
Setup Navigator
Amp Connection
Surround Speaker
Surround speakers are connected
to an amplifier
Move
ENTER
[Sub-woofer]
Audio1
2
Video
Language
Setup Navigator
Amp Connection
Sub-woofer
Sub-woofer is connected
to an amplifier
Move
ENTER
Settings: Present*
Not Present
Note
If "Not Present" is selected for both [Center Speaker] and
[Surround Speaker], [Sub-woofer] is automatically set to "Not
Present" and the [Sub-woofer] screen is not displayed.
General
Prese
Present
Not Present
Select
SETUP
Exit
General
Prese
Present
Not Present
Select
Exit
SETUP
General
Prese
Present
Not Present
Select
SETUP
Exit
* Factory setting
23
En

Publicité

Chapitres

Table des Matières
loading

Table des Matières