Confirming Pairing - Panasonic WX-ST400P Mode D'emploi

Confirming pairing

1
Remove the battery cover
Press on the portion labeled as
the battery cover and slide the cover downwards to
remove it.
2
Make sure the wireless receiver is turned ON
Make sure that the [POWER] indicator on the wireless receiver lights green.
Power indicator
3
Set the microphone to pairing confirmation mode
With the microphone powered on, press the
[REG] button once to enter pairing confirmation
mode (the [PWR] indicator will turn green and
orange alternately for five seconds).
on the back of
A
Register button
Power indicator
25