Connecting An External Device - Panasonic WX-ST400P Mode D'emploi

Connecting an external device

Connect an external device (eg: portable CD player) to the [AUDIO IN] connector of
the microphone to input the audio output from the device to the receiver.
Portable CD player
(locally procured)
1
Turn OFF the microphone and the external device
2
Connect the external device
Use a Ø3.5 mm stereo mini plug to connect the audio output from the external device
(eg: portable CD player) to the [AUDIO IN] connector.
3
Turn ON the external device (eg: portable CD player)
4
Turn ON the microphone
⚫ When a Ø3.5 mm stereo mini plug is connected to the [AUDIO IN]
connector, this audio source is given priority and the audio from the
microphone unit stops transmission.
⚫ If the external device outputs stereo audio, the L/R channels will be mixed.
⚫ Also refer to the manual of the external device you are connecting to the
microphone.
Ø3.5 mm stereo mini plug
1, 4
Power switch
2
External input
connector
29