Inserting The Battery - Panasonic WX-ST400P Mode D'emploi

Inserting the battery

Carefully read the "Precautions" section and follow all of its instructions.
Switch the power to OFF before inserting the battery.
See "Replacing the battery" (page 30) for instructions on changing the battery.
⚫ Do not touch the battery poles with your hands. Doing so may cause
connection problems and noise. If the battery poles become dirty, clean
them with a dry, soft cloth.
Battery slot
A
4
2
Battery cover
1
Make sure that the [PWR] indicator is off
2
Remove the battery cover
Press on the portion labeled as
downwards to remove it.
3
Insert the battery
Check the polarity of the battery (positive
rechargeable Ni-MH AA-type battery or one AA-type alkaline dry-cell battery in the
battery slot according to the polarity indication ( ,
4
Place the battery cover back on
Slide the battery cover upwards to place it back on.
16
1
Power indicator
Battery (locally procured)
on the back of the battery cover and slide the cover
and negative
).
3
), and insert either one