Confirming Pairing - Panasonic WX-ST200P Mode D'emploi

Confirming pairing

1
Remove the battery cover
Turn the battery cover to the left and slide it downwards to remove it.
2
Make sure the wireless receiver is turned ON
Make sure that the [POWER] indicator on the wireless receiver lights green.
Power indicator
3
Set the microphone to pairing confirmation mode
With the microphone powered on, press the [REG]
button once to enter pairing confirmation mode
(the [PWR] indicator will turn green and orange
alternately for five seconds).
Loosen
Battery cover
Tighten
Power indicator
Register button
25