PMA KS 30 Mode D'emploi page 3

Industrial controller KS 30
g
a
Emission: EN 50081-1
heating (relay ON = yellow LED lit)
cooling (relay ON = yellow LED lit)
process value
set-point
lit with: ramp / programmer
blinks with: gradient / programmer (mains recovery)
heating current monitoring (error = red LED lit)
limit contact (X within limits = green LED lit)
selector key
increase value Ä g
decrease value Ä g
Immunity: EN 50082-2
without restriction
r
Operating instructions
9499 040 50901
valid from 8333
t S.I.L. switch closed
t S.I.L. switch open