Charging Procedure - Motorola Solutions DTR Serie Mode D'emploi

Charging Procedure

To charge the battery (with the radio attached), place it in a Motorola
Solutions approved DTR SUC Tray (see Table 2):
1. Place the DTR SUC Tray on a flat surface.
2. Insert the connector of the power supply into the port on the side of
the drop-in tray charger.
3. Plug the wall receptacle end of the power supply cord into
appropriate AC outlet. A successful power-up sequence in
indicated by a SINGLE FLASH GREEN on the charger indicator.
4. Turn the radio "OFF".
5. Insert the radio into the tray with the front of the radio facing the
front of the charger, as shown.
DTR SUC Tray
5