Important Safety Instructions; Operational Safety Guidelines - Motorola Solutions DTR Serie Mode D'emploi

Masquer les pouces Voir aussi pour DTR Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English

IMPORTANT SAFETY INSTRUCTIONS

This document contains important safety and operating
instructions. Please read these instructions carefully and save
them for future reference.
Before using the battery charger, read all the instructions and
cautionary markings on (1) the charger and (2) the battery.
1. To reduce risk of damage to the power cords, pull the
plug rather than the cord when disconnecting from the AC
outlet or the charger.
2. An extension cord should not be used unless absolutely
necessary. Use of an improper extension cord could result in risk of
fire and electric shock. If an extension cord must be used, make
sure that the cord size is 18 AWG for lengths of up to 6.5 feet
(2.0 m), and 16 AWG for lengths up to 9.8 feet (3.0 m).
3. To reduce risk of fire, electric shock, or injury, do not operate the
charger if it has been broken or damaged in any way. Take it to a
qualified Motorola Solutions service representative.
4. Do not disassemble the charger. It is not repairable and
replacement parts are not available. Disassembly of the charger
may result in risk of electric shock or fire.
5. To reduce risk of electric shock, unplug the charger from the AC
outlet before attempting any maintenance or cleaning.
6. To reduce risk of injury, charge only the rechargeable Motorola
Solutions Authorized Batteries listed in Table 1. Other batteries
may explode, causing personal injury and damage.
7. Use of accessories not recommended by Motorola Solutions may
result in risk of fire, electric shock, or injury.

OPERATIONAL SAFETY GUIDELINES

• Turn off the radio when charging the battery.
• This equipment is not suitable for outdoor use. Use only in dry
locations and conditions.
• Maximum ambient temperature around the charger must not exceed
40 °C (104 °F).
1

Publicité

Table des Matières
loading

Table des Matières