Motorola Solutions DTR Serie Mode D'emploi page 4

• Connect the charger only to an appropriate power supply and power
cord listed in Table 2, Table 3, and Table 4.
• The AC outlet to which the power cord is connected should be close
and easily accessible.
• Make sure the power cord is located where it will not be stepped on,
tripped over, or subjected to water, damage, or stress.
• Connect the power cord only to an appropriately fused and wired AC
outlet with the correct voltage, as specified on the product.
• Disconnect from line voltage by removing the power cord from the
AC outlet.
Table 1:
Kit Number
PMNN4578_
Motorola Solutions Authorized Single Unit Charger And Power
Table 2:
Charger Kit Description
PMPN4468_ DTR Single Unit Charger (SUC) Tray
DTR Single Unit Charger (SUC) Kit for North
PMPN4469_
America
* UL certification only applied when charger kits shipped with the power supplies listed above.
Motorola Solutions Authorized Battery
Description
Li-Ion Battery
Supplies
2
Power Supplies
None
PS000228A01*