Charging The Battery - Motorola Solutions RLN6434 Guide De L'utilisateur

Charging Inside the Vehicle
1. Plug the vehicular charger adapter into the
vehicle's auxiliary power outlet.
Note:
Some vehicles' auxiliary power outlets do not
maintain an electrical current once the vehicle has
been turned off. Rated input: 12 – 24 DC 1.2 A.

Charging the Battery

1. Insert a battery or radio with a battery into the
charger pocket, making sure the charging
contacts make contact with the battery. The
battery charging indicator LED on the
charger indicates:
Table 2. Battery Charging Indicators
Status
Power On Green for
approximately
1 second
Charging Steady Red
90% Blinking Green Battery is charged to 90% or
Charged
Fully Steady Green
Charged
Fault Blinking Red
Standby Blinking
Amber
LED Status
9
Descriptions
Successful charger
power-up
Battery in rapid charge mode
greater capacity
Battery is nearly charged or
fully charged
Remove and re-insert radio
or battery
Battery is waiting to rapid
charge. Battery may be too
hot, too cold, or low voltage