Scheduled Cleaning - Dreame Bot D9 Pro Manuel D'utilisation

How to Use
EN
6. Spot Clean Mode
When the robot is paused or in Standby Mode, press and hold the
button for 3 seconds to start Spot Clean Mode. In this mode, it will
clean a square-shaped area of 1.5 ×1.5 meters directly around the
robot. When the spot cleaning is done, the robot will automatically
return to its original location and power off.
1.5 meter
1.5 meter
Note: When the robot is paused, placing it onto the charging dock will end the
current cleaning task.
12

7. Scheduled Cleaning

You can schedule cleaning time in the Mi Home/Xiaomi Home app.
The robot will automatically start cleaning at the designated time
and then return to the charging dock to recharge when the cleaning
is done.
8. Additional App Functions
Follow the instructions on the app interface to use more functions.
The version of the app might have been updated; please follow the
instructions based on the current app version.
How to Use
9. Use the Mopping Function
It is recommended that all floors are vacuumed at least three times
before the first mopping session to achieve a better cleaning effect.
1) Dampen the mop pad and wring out excess water. Slide the pad all
the way into the slot of the water tank until it is securely in place.
2) Open the water tank lid, fill the tank with water, then securely close
the lid.
Note: Do not use detergent or disinfectant.
3) Align the mopping module as indicated by the arrow, then slide it
into the back of the robot until it clicks into place. Press the button
or use the Mi Home/Xiaomi Home app to start cleaning.
Click
Click
Note:
· It is not recommended to use the mopping function on carpets.
· Use the app to adjust the water flow as required.
4) Press the two side clips inwards and slide the water tank backwards
to separate it from the robot.
Note: When the robot is charging or not in use, remove the mopping module,
pour out all the remaining water in the tank, and clean the mop pad to prevent
mildew or odor.
EN
13