Ghibli & Wirbel POWER WD 80.2 P CF Utilisation Et Entretien page 14

PROBLEM
The vacuum cleaner does
not work.
Suction is not satisfactory.
Does not discharge.
CAUSE
Switch not pressed.
Plug not inserted.
No current.
Filter elements clogged.
Accessories or
clogged.
Suction nozzle squeegee
worn or damaged.
Tap closed.
Pump off.
ENGLISH - 4
Professional Cleaning Machines Since 1968
SOLUTION
Press the switch.
Insert the plug into the sock-
et.
Check the power supply line.
Clean the filter elements.
tubes Check and clean the flexible
hose and the suction nozzle.
Check and
squeegee.
Turn on the tap.
Check that the pump switch
is in position "I".
www.ghibliwirbel.com
replace the